Kellys Whip 50, model 2019
frame size M / L
fork RST Dirt T, 100mm, coil spring
semi -integrated main composition
medium cartridge composition
SANOX cranks (34) - length 170mm
SRAM X5 9-Speed Trigger (rear)
SRAM X4 converter
number of transfers 9
pinion SHIMANO CS-HG300-9 (11-28)
KMC X9 chain (104 articles)
brakes SHIMANO MT200 Hydraulic Disc
brake discs front 160mm / rear 160mm
SHIMANO BL-MT200 brake levers
KLS Firework Disc cartridges (32 holes)
rims KLS Brave Disc 559x23 (36 holes)
string stainless steel black
tires SCHWALBE Nobby Nic Performance 57-559 (26x2.25)
representative KLS 45mm
handlebars KLS 740mm
KLS Advancer handles
seatpost KLS Active - diam 30.9mm / length 300mm
saddle KLS Vader
pedals HT Pedals - nylon composite
accessories chain guide Mozartt Presto, ISCG 05
Model year | 2019 |
Gears | 1x9 |
Groupset | SRAM X5, SRAM X4 |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 70799 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews