Kellys Whip 30, model 2020
frame size M / L
fork SR SUNTOUR XCR LO-R (26), 100mm, coil / Speed Lockout
semi -integrated main composition
cranks PROWHEEL Charm (32T) - length 170mm
number of transfers 1
cassette pinion single speed 15T
KMC Z1 chain (86 articles)
brakes C-STAR CX7 Mechanical Disc
brake discs rear 160mm
TEKTRO brake levers
KLS Firework / KT Disc single-speed cartridges (32 holes)
rims KLS Brave Disc 559x23 (32 holes)
string stainless steel black
tires SCHWALBE Table Top Performance 57-559 (26x2.25) ADDIX
stem KLS Alm / En 50 - diam 28.6mm / bar bore 31.8mm / length 45mm
handlebars KLS Alm / En 70 RiseBar - diam 31.8mm / rise 25mm / width 740mm
handles kraton
BMX seatpost Pivotal - diam 30.9mm / length 200mm
saddle VELO Pivotal
pedals VP Grind - nylon platform
Model year | 2020 |
Gears | 1x1 |
Groupset | Other |
Material | aluminium |
Brakes | Mechanical disc brakes |
product ID | 89512 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews