Kellys WHIP 10 Purple, model 2021
frame size M / L
fork SR SUNTOUR XCM (26), 100mm, coil spring
main composition semi-integrated
medium composition SAMOX cartridge
SAMOX cranks (32T) - length 170mm
shifting SHIMANO SL-M310 Rapidfire Plus
derailleur chain guide MOZARTT Presto, ISCG 05
SHIMANO Acera M360 converter (direct mount)
number of transfers 7
cassette pinion SHIMANO CS-HG200-7 (12-32T)
KMC Z7 chain (106 links)
brakes C-STAR CX7 Mechanical Disc
brake discs front 160mm / rear 160mm
APSE brake levers
KT Disc cartridges (32 holes)
rims KLS Draft Disc 559x21 (32 holes)
string steel
tires KENDA Small Block Eight 58-559 (26x2.35)
stem KLS Alm / En 50 - diam 28.6mm / bar bore 31.8mm / length 45mm
handlebars KLS Alm / En 70 RiseBar - diam 31.8mm / rise 38mm / width 740mm
handles kraton
seatpost KALLOY - diam 30.9mm / length 300mm
saddle KLS Vader
pedals KLS Flat - plastic platform
Model year | 2021 |
Gears | 1x7 |
Groupset | Shimano Acera |
Material | aluminium |
Brakes | Mechanical disc brakes |
product ID | 124514 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews