Kellys Whip 10 26 bike, purple
Kellys Whip 10 26 bike
Frame |
KELLYS Dirt 26, tapered HT, ISCG 05
|
Fork |
SR SUNTOUR XCM (26), 100 mm, coil spring
|
Shifting |
SHIMANO SL-M310 Rapidfire Plus
|
Derailleur |
SHIMANO Acera M360 (direct mount)
|
Derailleur |
chain guide MOZARTT Presto, ISCG 05
|
Chain |
KMC Z7 (106 articles)
|
Cranks |
SAMOX (32T) - length 170 mm
|
Brakes |
Mechanical Disc
|
Brake levers |
APSE
|
Brake discs |
front 160 mm / rear 160 mm
|
Rims |
KLS Draft Disc 559x21 (32 holes)
|
Spokes |
steel
|
Seat post |
KALLOY - diam 30.9 mm / length 300 mm
|
Saddle |
KLS Vader
|
Stem |
KLS Alm/En 50 - diam 28.6 mm / bar bore 31.8 mm / length 45 mm
|
Handlebars |
KLS Alm/En 70 RiseBar - diam 31.8 mm / rise 38 mm / width 740 mm
|
Grips |
kraton
|
Pedals |
KLS Flat - plastic platform
|
Headset |
semi-integrated
|
Bottom bracket |
SAMOX cartridge
|
Cassette pinion |
SHIMANO CS-HG200-7 (12-32T)
|
Sex | Men, Unisex |
Model year | 2022 |
Gears | 1x7 |
Groupset | Shimano Acera |
Size | M, L |
Colour | black |
Material | aluminium |
Wheel diameter | 26" |
Brakes | Mechanical disc brakes |
Fork | Spring |
product ID | 185085 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews