GT Team 20 bike, white
GT Team 20 bike
GT Team 2021 is a universal Freestyle BMX bike suitable for beginners and advanced riders, from a height of approx. 150 cm.Frame |
Cr-Mo Front Tri (T/T, D/T, S/T), DT Gusset, MID BB , Seat Stay U-Brake, Integrated 1-1/8" H/T w/ Removable Rotor Tabs
|
Fork |
Cr-Mo 2pc. Threaded Steerer & Tapered Legs, 31mm OffSet, 3/8" Axle Dropouts
|
Cassette |
9T 1 pc. Driver
|
Chain |
KMC Z410
|
Cranks |
GT Power Series GT 5mm 25T Alloy Chainwheel
|
Brakes |
Aluminum U-Brake w/ Soft Compound
|
Rims |
Alloy Single Wall (F), Double Wall (R) 36 h
|
Spokes |
Stainless Steel, 14 g
|
Tires |
GT LP-5 20 x (F) 2.2" (R) 2.35"
|
Seat post |
Alloy Pivotal 25.4 x 200 mm
|
Saddle |
GT Pivotal Padded
|
Stem |
GT Top Load, 1-1/8", Cold Forged Cap, 32mm Rise, 50mm
|
Handlebars |
GT Freestyle 4pc., Steel, 9.12 H x 29" W, 5° Up, 9° Back
|
Headset |
1 1/8" Integrated Design, 45x45 Degree Sealed Bearings
|
Pedals |
GT Low Profile FS Platform Design
|
Sex | Men, Unisex |
Model year | 2021 |
Gears | 1x1 |
Groupset | Other |
Colour | white |
Material | steel |
Brakes | V-brakes |
Fork | Rigid |
product ID | 121097 |
Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews