GT Pro Performer Heritage 29 2021 BMX
BMX bike, 29 "wheels, Cr-Mo frame.
The GT Pro Performer 29 BMX brings back the classic design on large wheels for a perfect comfortable ride. But don't be fooled by the old look. Classic look in a new coat.
Model year: 2021
Center composition: MID Sealed Bearing
Cassette: Cogs16T Cog
Chain: KMC Z1 Wide
Rims: Alloy Double Wall, 36h
Pedals: Yes
Brakes: Promax P-1 Aluminum V-Brake w / Soft Compound Pad
Stem: GT Mallet 100% CNC Front Load, 1-1 / 8 ", 19mm Rise, 43mm
Head composition: 1 1/8 "Integrated Design, 45x45 Degree Sealed Bearings
Handlebars: GT Performer Cheat Code 2pc. 100% Cr-Mo, 7.875 "H x 31.5" W, 5 ° Up, 9 ° Back
Tires: GT Smoothie 29 x 2.5 "
Saddle: GT Cheat Code Railed
Seatpost: Alloy Micro Adjust 25.4 x 300mm
Model year | 2021 |
Gears | 1x1 |
Groupset | Other |
Material | steel |
Brakes | V-brakes |
product ID | 118621 |
Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews