GT Air 2016 matte black BMX bike
Riders of smaller stature should not be limited when choosing a new bike. Unfortunately, in fact it is so often. If you don't have a basketball character either, GT Air is here for you. The significantly shortened upper frame tube and even the carefully selected components will definitely not interfere with you when training breakthrough tricks.
Model year: 2016
Frame: 2016 GT BMX Design, Hi-Ten Steel Tubes, DT Gusset, American BB, Seat Stay Mounted U-Brake, External 1-1 / 8 "H / T, Odyssey Springfield Brake compatible
Fork: GT BMX Design, Hi-Ten 31.8- 28.6mm Tapered OD Blades, 3/8 "Axle Dropouts
Cranks: GT Tubular CR-MO 3Pc., 170mm Arms, Cold Forged CR-MO 19mm x 8T Spline Spindle, 25T Steel Chain Wheel GT Design
Center composition: American Loose Ball Bearing
Cassette: 9T One Piece Driver
Chain: KMC Z410
Rims: Aluminum Single Wall, 36 Hole
Hubs: (F) Steel Body, Loose Ball 3/8 "Heat Treated Axle, 36 Hole, / (R) Steel Body, Loose Ball 9T Cassette 36 Hole
Wires: GT Low Profile Mid Size Platform Design, PP Material, Boron Axle
Pedals: GT Low Profile Mid Size Platform Design, PP Material, Boron Axle
Brakes: Aluminum U-Brake
Handlebars: H: 8.39 "(213mm), W: 28" (711mm), w / 19mm Crossbar, 3 ° up, 11 ° back
Stem: GT INVERT Top Load Design With Cold Forged Clamp, 40mm Ext
Head composition: 1-1 / 8 "Thread less, Steel
Brake levers: Alloy
Tires: F / R) 20 X 2.3 GT POOL STREET TREAD
Saddle: Integrated saddle w / post
Seatpost: Alloy, 25.4mm x 200mm
Sizes: 20 "wheel / 19.5" top tube
Color: matte black
Model year | 2016 |
Material | steel |
product ID | 13387 |
Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews