Rock Machine Crossride 300 28 bike, gloss silver/black/grey
Rock Machine Crossride 300 28 bike
Suitable not only for commuting, but also for occasional trips outside the city of a sports/recreational spirit. Enjoy cycle paths and paved roads during the weekend. If you want to ride frequently, you will need to do more fine-tuning.
Frame |
Alloy Al-6061 T6 Custom tubing, Cross Fun Geometry, Shark Spine Semi, BB BSA 73 mm, Disc Brake Post Mount, Fender&Kickstand Ready Dropout, Replaceable RD Hanger, Inner Cable Routing
|
Fork |
RST Neon, 1-1/8", 60 mm travel
|
Shifting |
Shimano Altus SL-M315 RapidFire Plus, 2x8-speed
|
Derailleur |
Shimano ACERA RD-M3020
|
Derailleur |
Shimano Tourney FD-TY606 Top Swing
|
Cassette |
Shimano CS-HG31-8, 11-34T
|
Chain |
KMC Z8.3
|
Cranks |
Shimano FC-TY501, 46-30T
|
Brakes |
Clarks CLOUT1, hydraulic disc brake
|
Brake discs |
SHIMANO SM-RT10, 160mm/160mm
|
Rims |
Stars J20S, 32H
|
Front hub |
Shimano HB-TX505, 32H, Center Lock, QR Type
|
Rear hub |
Shimano FH-TX505-8, 32H, Center Lock, M10x135 mm, QR Type
|
Spokes |
Sapim Galvanized Black
|
Tires |
WTB Riddler Comp, 29x1.75", Reflective Stripe
|
Seat post |
ONE1 Sport Alloy, SP C208, 27.2 mm
|
Saddle |
WTB Volt
|
Stem |
ONE1 Sport MAS-D61808 Alloy, 31.8 mm, ±15°
|
Handlebars |
ONE1 Sport, MHB AL-6045BT, 9° backsweep, 660 mm, 31.8 mm
|
Grips |
Velo ERGO
|
Headset |
FSA No.10 Semi-Cartridge, 1-1/8"
|
Bottom bracket |
SHIMANO BB-UN101 122.5 mm, BSA, shell 73 mm
|
Pedals |
Steel caged w/reflector
|
Sex | Men, Unisex |
Model year | 2023 |
Gears | 2x8 |
Groupset | Shimano Acera, Shimano Altus, Shimano Tourney |
Colour | gloss silver/black/grey |
Material | aluminium |
Wheel diameter | 28" |
Brakes | Hydraulic disc brakes |
Fork | Spring |
Fork travel | 60 mm |
product ID | 341684 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews