GT Transeo Comp 2018 Gloss Black cross bike
Universal cross bike, light aluminum frame, front suspension fork, 3x7 speeds, mechanical disc brakes.
GT Transeo Comp is a universal cross / trekking bike, which is equipped with a lightweight aluminum frame with Triple Triangle technology. The Triple Triangle construction has seatposts connected to the upper frame tube. As a result, vibrations from the rear wheel are transmitted to the frame instead of just to the seat tube (and rider).
The bike has a sprung fork, which will make your ride more pleasant on paved roads or lighter terrain. For greater driving safety, the GT Transeo Comp is equipped with mechanical disc brakes that retain their braking effect in all weather conditions. This trekking bike is equipped with Shimano components with 3x7 speeds.
GT Transeo Comp is designed for driving on roads and lighter terrain. It is one of the most versatile bicycles of this brand.
Frame: GT Transeo Triple Triangle, aluminum
Fork: All Terra Fork CH-189D 700C, stroke 60 mm
Cranks: SR Suntour XCC 48/38 / 28t
Middle composition: encapsulated
Gear levers: Shimano ST-EF41 Fire plus
Cartridge: Sunrace CSM40 11-32, 7 speeds
Chain: KMC Z51
Derailleur: Shimano FD TY710
Derailleur: Shimano Tourney RD-TX800
Rims: GT ASD10 aluminum, double-walled, 32 holes
Cartridges: Formula Disc 32 holes
Pedals: High Impact nylon Comfort
Brakes: Tectro mechanical disc,
Stem: Aluminum, Ahead, 10 ° pitch, 31.8 mm clamp
Head composition: Threadless Ahead
Brake levers: Shimano EF-41
Wires: Stainless steel, 14g
Tires : 700x40c Skinwall
Saddle: GT saddle
Seatpost: Aluminum
Handlebars: 6061 Aluminum Riser, width 640mm, sleeve 31.8mm
Model year | 2018 |
Gears | 3x7 |
Groupset | Shimano Tourney |
Material | aluminium |
product ID | 51445 |
Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews