Ghost Square Cross 1.8 AL W iridium silver / jetblack / starwhite, model 2019
Wheel size: 28"
Frame: SQUARE Cross AL
Fork: SR Suntour SF14 NEX DS-700C 63 mm
Derailleur: Shimano Altus RD-M2000 9-S Shadow Design
Cranks: Shimano FC-M371 48-36-26
Cassette: Shimano CS-HG-200-9 11-34
Brakes: Tektro HD-M285 2/2 Piston 160 mm Disc
Shifting: Shimano Altus SL-M2000
Main composition: 14106
Handlebars: GHOST Low Rizer SQUARE 680 mm Rise 25 mm Dia. 31.8 mm
Stem: GHOST SQUARE Dia. 31.8 mm
Seat post: GHOST SP-DC1 31.6 mm
Saddle: Justek 3050 DRN
Front hub: Formula DC 20 QR
Rear hub: Formula DC 22 QR
Derailleur: Shimano Altus FD-M370
Front stroke: 63 mm
Foot: EZ1954
Number of speeds: 27
Rear rim: Rodi Excalibur XC 622x19 mm 32H
Front rim: Rodi Excalibur XC 622x19 mm 32H
Front tire: Continental AT Ride 42-622
Rear tire: Continental AT Ride 42-622
Model year | 2019 |
Gears | 3x9 |
Groupset | Shimano Altus |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 63786 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews