Mongoose ROGUE 27.5 bike, black
Mongoose ROGUE 27.5 bike
Frame |
Tectonic T2, aluminum, 27.5” urban geometry, Integrated Rear Rack, internal cable routing, 9 mm x 135 mm dropout, replaceable hanger
|
Fork |
Xposure, 27.5”, steel steerer, 9 mm x 100 mm, QR
|
Shifting |
Shimano Acera SL-M2000, 2 x 9
|
Derailleur |
Shimano Altus RD-M2000
|
Derailleur |
Shimano FD-T3000-2, top swing, band clamp
|
Cassette |
Sunrace, 9-speed, 11-36T
|
Chain |
KMC X9
|
Cranks |
Prowheel RPL-421, aluminum, 46/30T
|
Brakes |
Tektro HD-M290, hydraulic, aluminum, 160 mm rotor
|
Rims |
Xposure MD-155, aluminum double wall, 26 mm ID, 32H, tubeless compatible
|
Hubs |
front: Xposure, aluminum, ball bearing, 9 mm x 100 mm, 32H, 6-bolt; rear: Xposure, aluminum, ball bearing, 9 mm x 135 mm QR, 32H, 6-bolt
|
Spokes |
14G, stainless steel
|
Tires |
WTB Horizon, 650c x 47c, wire bead
|
Seat post |
Xposure, aluminum, 350 mm, zero offset, 27.2 mm
|
Saddle |
Mongoose urban, steel rails
|
Stem |
Xposure 3D forged aluminum, threadless, 70 mm/90 mm, 6°, 31.8 mm clamp
|
Handlebars |
Xposure, aluminum, 680 mm width, 25 mm rise, 31.8 mm clamp
|
Grips |
Xposure Kraton, semi-ergo
|
Bottom bracket |
Prowheel, cartridge, 2-piece, threaded 68 mm shell
|
Pedals |
Mongoose, nylon
|
Headset |
Threadless, ZS44/ZS44, retainer bearing
|
Sex | Men, Unisex |
Model year | 2022 |
Gears | 2x9 |
Groupset | Shimano Acera, Shimano Altus |
Size | L |
Colour | black |
Material | aluminium |
Wheel diameter | 27.5" |
Brakes | Hydraulic disc brakes |
Fork | Rigid |
product ID | 177998 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews