Marin Stinson 2 27.5 bike, gray/red/blue
Choose personal collection at the store and decide on the spot.
Marin Stinson 2 27.5 bike
Frame |
Series 1 Comfort, 6061 Aluminum, 27.5” Wheels, Disc Specific, Comfort Control Geometry, Kickstand Mount, Fender and Rack Mounts
|
Fork |
CrMo Steel, Straight Blade, Disc Specific, Fender and Rack Eyelets
|
Shifting |
MicroSHIFT Advent 9-Speed
|
Derailleur |
MicroSHIFT Advent 9-Speed Wide Range
|
Cassette |
MicroSHIFT 9-Speed 11-46T
|
Chain |
KMC X9
|
Cranks |
Alloy Crank, Steel 38T Chainring, Ring Guard
|
Brakes |
Power CX7 Mechanical Disc, Shimano Pad Compatible, 160 mm Rotor
|
Brake levers |
Shimano w/ Integrated Shifters
|
Rims |
Marin Aluminium Double Wall, Disc Specific
|
Front hub |
Forged Aluminum, 32H, Disc Specific
|
Rear hub |
Forged Aluminum, 32H, Disc Specific
|
Spokes |
14g Stainless Steel
|
Tires |
Vee Tire Co. Speedster, 27.5”x2.35”, Puncture Protection
|
Seat post |
Marin Alloy, 30.9 mm
|
Saddle |
Marin Comfort
|
Stem |
Marin Alloy, 31.8 mm Clamp
|
Handlebars |
Marin Alloy, 25mm Rise, 18˚ Backsweep
|
Grips |
Marin Adventure
|
Headset |
FSA, TH No. 10P
|
Bottom bracket |
Sealed Cartridge Bearings, Square Taper
|
Pedals |
Marin Comfort Platform
|
Sex | Men, Unisex |
Model year | 2024 |
Gears | 1x9 |
Groupset | microSHIFT ADVENT |
Size | S, M, L, XL |
Colour | grey/red/blue |
Material | aluminium |
Wheel diameter | 27.5" |
Brakes | Mechanical disc brakes |
Fork | Rigid |
product ID | 287218 |
MTB
Size | S | M | L | XL |
---|---|---|---|---|
Height (cm) | 160 - 167.5 | 167.5 - 177.5 | 177.5 - 188 | 188 - 193 |
Size (cm) | 49 | 52 | 54 | 56 | 58 | 60 |
---|---|---|---|---|---|---|
Height (cm) | 150 - 160 | 160 - 167.5 | 167.5 - 175 | 175 - 183 | 183 - 188 | 188 - 193 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews