Muc-Off No Puncture Hassle Tube Sealant, 1L
Laugh in the face of a punctured inner tube with our super-lightweight yet tough inner tube seal! Muc-Off No Puncture Hassle Inner Tube Sealant is easy to install and the molecules seal holes in inner tubes up to 4mm, ensuring your ride is uninterrupted! Our patented, non-hazardous, water-based formula was developed specifically for use with inner tubes and is compatible with a wide range of bikes. Whether you're commuting, backpacking, hitting the trails, and everything in between, we have a solution for you!
Only suitable for tubes with Schrader valves and Presta valves with removable valve core. Not suitable for tubeless tires. You can find our revolutionary tubeless sealant here !
- Preventing inner tube punctures
- Suitable for MTB, road, eBikes, city, folding and touring bikes
- Seals holes in inner tubes up to 4 mm
- Works with multiple piercings
- Does not dry out
- Lasts for the entire lifespan of the soul
- Contains corrosion inhibitors
- Contains cutting-edge molecules that help seal holes quickly and effectively
- Soluble in water
- Not dangerous
- Does not contain ammonia
- Works at temperatures from -15°C to +50°C
Manual:
For tubes using a Schrader valve:
1. Remove the protective cap from the valve and deflate the tire, then spin the wheel so that the valve is in the 9 o'clock to 12 o'clock position.
2. Twist and pull the plastic tube from the top of the bottle.
3. Remove the black valve core removal tool from the top of the tube, then remove the valve core from the valve stem. (Insert the two-point tool into the top of the Schrader valve and unscrew counterclockwise to remove the core. Keep the valve core safe while filling!)
4. Now place the end of the filling tube onto the valve stem and turn the bottle upside down, gently pressing on the bottle to dispense the required amount of sealant into the valve. Ensure that the sealant flows smoothly into the valve. (Fill the recommended amount for your soul using the dosage scale on the side of the bottle.)
5. Remove the filler tube from the valve and wipe off any remaining sealant.
6. Reinstall the valve core using the tool and tighten it clockwise until it is tight, then inflate the tire to the required pressure in accordance with the manufacturer's recommendations.
7. Spin your wheel and you're ready to go!
For tubes using Presta valves:
1. If you are filling a No Puncture Hassle inner tube sealant into a Presta valve, you must first check if you have a removable valve core. (Not all Presta valve cores are removable).
2. You can check if a Presta valve has a removable core by identifying whether the sides of the valve core have a flat edge. Presta valves with a non-removable core will not have flat edges.
3. If it has flat edges, you can remove the core using a Presta valve core removal tool or a set of thin-set core removal pliers by unscrewing it counterclockwise until it comes free from the valve stem. Keep the valve core safe during filling!
4. Now place the end of the filler tube onto the valve stem and turn the wheel so that your valve is at the 6 o'clock position. Turn the bottle upside down and gently press on the bottle to dispense the required amount of sealant into the valve. Ensure that the sealant flows smoothly into the valve. (Fill the recommended amount for your inner tube using the dosing scale on the side of the bottle.)
5. Remove the filler tube from the valve and wipe off any remaining sealant.
6. Reinstall the valve core using the tool and tighten it clockwise until it is tight, then inflate the tire to the required pressure in accordance with the manufacturer's recommendations.
7. Spin your wheel and you're ready to go.
| product ID | 305724 |
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
We are available via email, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
There are currently no reviews