OKO Magic Milk tubeless sealant, 500 ml
OKO Magic Milk super light sealant that will not damage the rim or stick the valves. It creates a stable coating inside the shell and seals immediately. The cover can be easily cleaned with water. Seals holes up to 6+ mm. It is active for 6 to 9 months. CO2 friendly !
Recommended dosage and installation of sealant:
Road tires: 30-50 ml per tire.
MTB 26" tires: 60-80 ml in one tire.
MTB tires 27.5" : 80-100 ml in one tire.
MTB 29" tires: 100-120 ml in one tire.
MTB DH tires: 100-140 ml in one tire.
Filling the jacket with a valve:
Unscrew the valve and use the applicator to press the required amount into the mouth. Screw in the valve and tighten.
Filling the jacket from:
Place the tire on the rim from one side only. Hang the wheel so that it is in a vertical position. The valve must be down.
Pour an appropriate amount of sealant into the casing. The bottle must always be upside down during application.
Put on the mantle from the other side as well. Start at the top and work your way towards the valve. Fit the last part of the tire by turning the wheel with the valve facing up.
Inflate the MTB tire to the required pressure. For road tires, use pressure as recommended by the rim and tire manufacturer. Do not exceed the recommended pressure. If the recommended pressures differ, do not exceed the lower of the recommended pressures.
Swirl around to get the sealant into all the places inside the casing.
Take a test drive. With the correct assembly procedure, the casing holds the pressure.
Use: road, MTB
Volume: 500 ml
product ID | 215657 |

There are currently no reviews