Topeak JOE BLOW TUBI 2STAGE pump
Another improvement of the proven workshop 2-stage inflator with 2STAGE technology for tubeless tires.
The upgrade refers to the new TUBI-HEAD hose end, with which you can loosen the core of the valve after putting it on the valve and inflate without air leakage when handling the valve. The TUBI-HEAD tip has a transparent body to make working with the valve core clearer. Using the rotary releaser, you elegantly unscrew the valve core without touching it with your hands and screw it back in after inflation. Before releasing the tip from the valve, it is necessary to release the air using the button, because the tip is under pressure. Inflating with this end cap is also possible with standard tires with inner tubes (FV, AV).
2STAGE technology is characterized by the possibility of inflating with high pressure and a large volume of air in record time. The 1st stage of inflation uses a large volume with a pressure of up to 30 psi, when inflation is 30% less strenuous than with standard inflators. The 2nd stage uses a smaller barrel in the inflator body to achieve high pressure up to 160 psi.
• steel body and anodized duralumin elements and a massive steel base for greater stability
• ergonomic handle with double-mix polymer lining
• air volume per piston compression - 715 ml (1st stage) and 258 ml (2nd stage)
• 3" analog pressure gauge with scale up to 160 psi / 11 bar
• long hose that can be positioned at an angle of 360 degrees with a mode switch and with a one-sided TUBI-HEAD end, galus valve / classic valve
• adapter for Schrader (AV) car valve is also included
• dimensions: 74 x 26.6 x 18 cm
• weight: 2.3 kg
product ID | 171768 |
comment Reviews
There are currently no reviews